Sony MPK-DVF6 Mode D'emploi page 11

6
Prepare to record.
1 Set the POWER switch to CAMERA.
2 Set COMMANDER to ON in the menu settings.
3 Cancel the following functions: BACK LIGHT, NIGHTSHOT, PROGRAM AE,
flash and Picture effect.
4 Set the FOCUS switch to AUTO.
5 Set DISPLAY to V-OUT/LCD in the menu settings and press the DISPLAY
button on your camcorder before installing the marine pack.
* If your camcorder has REC LAMP in the menu settings, set it to OFF. By using
this function, the light of the lamp is not reflected in the lens. For details, please
refer to the operating instructions supplied with your camcorder.
GB
continued
11
-GB