Sony MEX-BT4000U Mode D'emploi page 42

– Insert a music CD in this unit.
– Connect a USB device with a music file in it.
NO NAME
 A disc/album/artist/track name is not written
in the track.
NO PHONEBOOK
 There is no phonebook in this unit.
– Transfer phonebook data to this unit.
NOT FOUND
 There is no item beginning with the selected
letter in Alphabet search.
NO TP (No Traffic Programs)
 The unit will continue searching for available
TP stations.
OFFSET
 There may be an internal malfunction.
– Check the connection. If the error indication
remains in the display, consult your nearest
Sony dealer.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing .
– Indicates that the USB device is out of order,
or an unsupported device is connected.
P (preset number) EMPTY
 The preset dial is empty.
PUSH EJT (Push Eject)
 The disc cannot be ejected.
– Press  (eject).
READ
 The unit is reading all track and album
information on the disc.
– Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
UNKNOWN
 Name or phone number cannot be displayed
when browsing phonebook or call history.
USB NO SUPRT (USB Not Supported)
 The connected USB device is not supported.
42
– For details on the compatibility of your USB
device, visit the support site.
WITHHELD
 Phone number is hidden by caller.
" " or "
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
" "
 The character cannot be displayed with the
unit.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.
"