How The Energizer Works; Practical Hints - Gallagher M5800i Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Gallagher 3E3446 M5800i/M10000i Energizer User Manual

HOW THE ENERGIZER WORKS

The energizer sends electrical pulses along the fence line, about one second apart.
These pulses give the animal a short, sharp, but safe shock. The shock doesn't harm
the animal. It is sufficiently memorable that the animal never forgets the shock,
and will avoid the fence.

Practical Hints

Check your local ordinance on fencing laws: local laws may require a permit
before use.
Check the fence periodically. Remove any fallen branches, weeds or shrubs
because these will cause the fence to short out and will reduce animal
control.
All animals need time to learn to respect the fence. It may take several days to
train the animal and the fence may require minor adjustments.
Animals that are prone to jumping may be difficult to confine. You may need
to try different fence heights to determine the best height.
Use top quality insulators: low quality or cracked insulators and plastic tubing
are not recommended because they will cause shorting.
Use joint clamps on all steel wire connections to ensure a high quality circuit.
This energizer must be earthed using galvanised metal earth stakes to ensure
the electric fence works correctly.
Double Insulated Cable should be used in buildings, under gateways and
where soil could corrode exposed galvanised wire. Never use household
electrical cable. It is made for a maximum of 600 volts and will leak electricity.
On permanent power fencing, use high tensile 12.5 gauge (2.5 mm) wire.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M10000i

Table des Matières