Clean Speci C Materials; Clean The Stainless Steel - Arneg Velden Twin self Manuel D'installation Et De Service

22.5 Clean speci c materials

Material
• use a so cloth with a neutral
detergent or soap and lukewarm
water (max 30°C).
• Immediately remove all traces of
Glass water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
• use a cloth soaked in neutral de-
Plas c
tergent
(door seal
• clean with a cloth soaked in clean
pro les)
water
Aluminium • Use a so cloth with a neutral
detergent or soap and lukewarm
water (max 30°C).
• Immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming.
Wood • Use a so cloth with a neutral
detergent or soap and lukewarm
water (max 30°C).
• Immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming.
• If necessary, before trea ng the
en re surface, test on a small
hidden area and verify that the
cleaner will not damage the nish
or color

22.6 Clean the stainless steel

Certain situa ons can cause the forma on of rust on the surfaces in steel:
iron remains le on damp surfaces, limestone, chlorine or ammonia based detergents not rinsed
properly, food incrusta ons or residues, salt-saline solu ons, dry residues of evaporated liquids.
How to proceed recent stains and rust:
clean with shampoo or neutral detergents, using a sponge or a rag.
When nished, eliminate any detergent residue, rinsing abundantly and tho-
roughly drying the surfaces.
old stains and rust:
use chemical substances on the stainless steel that contain 25% of nitric acid or
similar substances.
persistent stains and rust:
sandpaper or polish with a stainless steel brush. A er this opera on, wash with
detergents and carefully dry.
CAUTION! Slippery oor. Falling.
Remove from the oor any items such as sponges, rags, waste of water or detergent.
05060161 00 08-04-2015
How to proceed
This interven on may however cause scratches to the surfaces due to the
abrasive cleaning method.
DO NOT use muria c acid on stainless steel surfaces
What to avoid
DO NOT use hot water on cold glass surfaces;
the glass could crack and injure the operator.
DO NOT use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
DO NOT use dirty cloths
DO NOT use waxes, concentrated detergents,
which contain oil, bleach, glass cleaners, abra-
sive detergents or ammable uids
DO NOT use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
DO NOT use rough or abrasive materials or
metal scrapers that could scratch the alumi-
nium surfaces
DO NOT use steam cleaning equipment
DO NOT use dirty cloths
DO NOT use spray cans, acid or alkaline de-
tergents (e.g. bleach), soda or solvents which
could corrode the surfaces
DO NOT use rough or abrasive materials that
could scratch the surfaces
DO NOT use steam cleaning equipment
DO NOT use rough cloths
moderate the use of liquid detergent: overuse
causes seepage and then swelling of the wood
Velden
English
43