Sony MHC-ECL99BT Mode D'emploi page 35

Système audio maison
Masquer les pouces Voir aussi pour MHC-ECL99BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

On placement
ˎ Do not place the system in an inclined
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
ˎ Be careful when placing the unit or
speakers on surfaces that have been
specially treated (for example, with wax,
oil, polish) as staining or discoloration of
the surface may result.
ˎ If the system is brought directly from a
cold to a warm location or is placed in a
very damp room, moisture may condense
on the lens inside the CD player, and
cause the system to malfunction. In this
situation, remove the disc, and leave the
system turned on for about an hour until
the moisture evaporates.
On heat buildup
ˎ Heat buildup on the unit during operation
is normal and is not cause for alarm.
ˎ Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
ˎ Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait 15 to
30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad,
scouring powder, or solvent, such as thinner,
benzine, or alcohol.
On BLUETOOTH Communication
ˎ BLUETOOTH devices should be used
within approximately 10 meters (33 feet)
(unobstructed distance) of each other.
The effective communication range may
become shorter under the following
conditions.
 When a person, metal object, wall
or other obstruction is between the
devices with a BLUETOOTH connection
 Locations where a wireless LAN is
installed
 Around microwave ovens that are in
use
 Locations where other electromagnetic
waves occur
ˎ BLUETOOTH devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
BLUETOOTH device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try the
following remedies:
 Try connecting this system and
BLUETOOTH device when you are at
least 10 meters (33 feet) away from the
wireless LAN equipment.
 Turn off the power to the wireless
LAN equipment when using your
BLUETOOTH device within 10 meters
(33 feet).
ˎ The radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn off
the power on this system and BLUETOOTH
device in the following locations:
 In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gases may be present
 Near automatic doors or fire alarms
ˎ This system supports security functions
that comply with the BLUETOOTH
specification as a means of ensuring
security during communication using
BLUETOOTH technology. However, this
security may be insufficient depending
on the setting contents and other factors,
so always be careful when performing
communication using BLUETOOTH
technology.
ˎ Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using BLUETOOTH technology.
ˎ BLUETOOTH communication is not
necessarily guaranteed with all
BLUETOOTH devices that have the same
profile as this system.
35
GB

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Mhc-ecl77bt

Table des Matières