Transferring Music From A Disc - Sony MHC-ECL99BT Mode D'emploi

Transferring music from
a disc
You can transfer music from a disc
(CD-DA disc or MP3 disc) by using
the following transfer modes of this
system.
CD SYNC transfer: Transfer all the CD-
DA tracks from the CD-DA disc.
MP3 folder transfer: Transfer MP3
files in a specific folder from the MP3
disc.
REC1 transfer: Transfer a currently
playing track or MP3 file from the disc.
1
Select the CD function.
Press CD.
2
Connect the USB device to the
(USB) port.
3
Load a disc you want to
transfer.
4
Prepare for transferring.
Proceed to step 5 in case of CD
SYNC transfer.
For MP3 folder transfer
To transfer MP3 files in a specific
folder, press
to select the folder you want. Then
start playback and press  once.
Make sure the elapsed playing time
has stopped on the display.
For REC1 transfer
Press / to select the track
or MP3 file you want to transfer,
then start playback.
To transfer an MP3 file in a specific
folder, press
to select the folder you want, then
press / to select the MP3
file you want to transfer. Then start
playback.
5
Press REC TO USB on the unit.
"READY" appears on the display.
16
GB
+/ – repeatedly
+/ – repeatedly
6
Press .
Transferring starts, then "USB REC"
appears on the display.
Do not remove the USB device until
transferring is completed.
When transferring is completed,
"COMPLETE" appears on the display
and audio files in MP3 format will
be created.
To stop transfer
Press .
Folder and file generation rules
When first transferring to a USB
device, a folder ("CDDA001*,"
"MP3_REC1" or "CD_REC1") is created
directly below the "ROOT" (in case of
MP3 folder transfer, a folder that has
the same name as the transferring
source is created below the "ROOT").
Folders and files are generated as
follows.
CD SYNC transfer
Transferring Folder
source name
CD-DA "CDDA001"* "TRACK001"*
MP3 folder transfer
Transferring Folder
source name
MP3 Same as the
transferring source
REC1 transfer
Transferring Folder
source name
MP3 "MP3_REC1"
CD-DA "CD_REC1"
* Folder and file numbers are assigned
serially thereafter.
File name
File name
File name
Same as the
transferring
source
"TRACK001"*