Warranty; Safety Instructions - Becker Centronic Unitcontrol UC42 Notice De Montage Et D'utilisation

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g., crush-
ing of limbs. Therefore, structural modifications may only be carried out with
our prior approval and strictly in accordance with our instructions, particularly
the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their inten-
ded use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant
current statutory, official and, in particular, EMC regulations are adhered to
during utilisation of our products, especially with regard to end product manu-
facture, installation and customer advice.
General information
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufacturer.
•
Keep children away from control units.
•
Observe all pertinent country-specific regulations.
Caution
• Risk of injury due to electric shock.
•
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
•
Disconnect the connecting cable from the power prior to
installation.
•
Always comply with regulations of local energy supply
companies as well as VDE 100 provisions for wet and
damp rooms during installation.
• Keep people out of the system's range of travel.
• If the system is controlled by one or several appliances,
the system's range of travel must always be visible during
operation.

Warranty

Safety instructions

11 - en