General; Intended.use; Warranty - Becker BECK-O-TRONIC 5 Basic Notice De Montage Et D'utilisation

Assembly and Operating Instructions

General

The.BECK-O-TRONIC.5.Basic.is.a.high-quality.product.with.many.performance.fea-
tures.and.advantages:
•. Simple.connection
•. Simple.handling.with.high-level.of.flexibility
•. Modular.system.due.to.insert.card.for.radio
•. Optical.and.electrical.safety.edges
Always.observe.the.information.provided.in.these.instructions.when.installing.and.set-
ting.the.device.
Intended use
The. BECK-O-TRONIC. 5. Basic. is. only. intended. for. controlling. tubular. drives. in. roller.
doors.which.are.equipped.with.fixed.stops.in.the.limit.stops.or.a.cover.on.the.winding.
shaft.(EN.12453).
A.safety.edge.mechanism.is.required.for.downward.travel.in.self-locking.mode.
Other.applications,.utilisation.and.modifications.are.not.permitted.in.order.to.protect.
the.safety.of.the.users.and.others,.since.these.actions.can.impair.the.system's.safety,.
resulting.in.personal.injuries.and.property.damage..Becker-Antriebe.shall.not.accept.
liability.for.damages.arising.from.such.actions..Always.observe.the.information.in.these.
instructions.when.operating.or.repairing.the.system..Becker-Antriebe.shall.not.accept.
liability.for.damages.resulting.from.incorrect.usage.

Warranty

Structural. modifications. and. incorrect. installation. which. are. not. in. accordance. with.
these.and.our.other.instructions.can.result.in.serious.injuries,.e.g..crushing.of.limbs..
Therefore,.structural.modifications.should.only.be.carried.out.with.our.prior.approval.
and.in.accordance.with.our.instructions,.particularly.the.information.contained.in.these.
Assembly.and.Operating.Instructions.
Any.further.processing.of.the.products.which.does.not.comply.with.their.intended.use.
is.not.permitted.
The.end.product.manufacturer.and.fitter.have.to.ensure.that.all.the.current.statutory,.
official. regulations. and,. in. particular,. EMC. regulations. are. adhered. to. during. utilisa-
tion.of.our.products,.especially.with.regard.to.end.product.assembly,.installation.and.
customer.advice.
12