Handheld.transmitter - Becker BECK-O-TRONIC 5 Basic Notice De Montage Et D'utilisation

Handheld transmitter
But-
ton.with.
impulse.
sequence.
UP-STOP-
DOWN-
STOP
Handheld transmitter
The.door.system.can.be.remote.controlled.via.a.
1-channel. handheld. transmitter. or. a. button. of. a.
multi-channel. handheld. transmitter.. This. means.
that. the. BECK-O-TRONIC. 5. Basic. has. to. be.
equipped.with.a.radio.receiver.and.the.handheld.
transmitter.has.to.be.programmed.at.the.BECK-
O-TRONIC.5.Basic.
Radio-controlled operation
With.the.aid.of.the.handheld.transmitter,.the.roller.
door. can. be. remote-controlled. in. the. following.
impulse. sequence. (UP-STOP-DOWN-STOP....
etc.).
Programming the handheld transmitter
Proceed. as. follows. to. program. the. handheld.
transmitter. or. a. button. of. a. multi-channel. hand-
held.transmitter:
1.. Open.the.lid.of.the.BECK-O-TRONIC.5.Basic.
by.loosening.the.four.lid.screws.and.placing.it.
onto.the.BECK-O-TRONIC.5.Basic.as.shown.in.
the.adjacent.figure.
2.. Briefly.press.the.radio.PRG.button.at.the.bot-
tom.right.of.the.control.unit.
3.. The. BECK-O-TRONIC. 5. Basic. signals. pro-
gramming. mode. (10. seconds). via. a. flashing.
green.LED.
DE
GB
FR
NL
15