Instruction Plate; General Safety; Health & Safety - Belle Group ALTRAD EASY SCREED 200 Manuel De L'opérateur

BELLE GROUP
www.BelleGroup.com
TYPE
MASSE UTILE
¯ MAXI OUTIL
¯ ALESAGE
T/MN - RPM
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the 'Easy Screed 200', consult your supervisor or Belle Group.
WARNING
• This equipment is heavy and must not be lifted single-handedly, either GET HELP or use suitable lifting equipment.
• Cordon off the work area and keep members of the public and unauthorised personnel at a safe distance.
• Personal Protective Equipment (PPE) must be worn by the operator when ever this equipment is being used (see Health & Safety).
• Make sure you know how to safely switch this machine OFF before you switch it ON in case you get into dif¿ culty.
• Always switch OFF the machine before transporting, moving it around the site or servicing it.
• During use the engine becomes very hot, allow the engine to cool before touching it. Never leave the engine running and
unattended.
• Never remove or tamper with any guards ¿ tted, they are there for your protection. Always check guards for condition and security, if
any are damaged or missing, DO NOT USE THE MACHINE until the guard has been replaced or repaired.
• Do not operate the machine when you are ill, feeling tired, or when under the inÀ uence of alcohol or drugs.
Fuel Safety
WARNING
• Before refuelling, switch off the engine and allow it to cool.
• When refuelling, DO NOT smoke or allow naked À ames in the area.
• Spilt fuel must be made safe immediately, by using sand. If fuel is spilt on your clothes, change them.
• Store petrol in an approved, purpose made container away from heat and ignition sources.
Vibration
Some vibration from the machine is transmitted through the handle to the operator's hands. Refer to speci¿ cations & technical data for
vibration levels and usage times (recommended maximum daily exposure time). DO NOT exceed the maximum usage times.
PPE (Personal Protective Equipment)
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear (with anti-slip soles for added protection). Wear clothing suitable for the work you are doing. Tie back long hair and remove
any jewellery which may catch in the equipment's moving parts. Always protect skin from contact with concrete.
Exhaust Fumes
Do not operate the machine indoors or in a con¿ ned space, make sure the work area is adequately ventilated.
WARNING

Instruction Plate

1
No. SERIE
ANNEE DE
FABRICATION
2
Kg PUISSANCE
PLAGE DE
3
mm
TENSION
4
mm FREQUENCE
5
INT. UTIL.

General Safety

Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
Fuel is À ammable. It may cause injury and property damage. Shut down the engine, extinguish all open
À ames and do not smoke while ¿ lling the fuel tank. Always wipe up any spilled fuel.
Health & Safety
The exhaust fumes produced by this equipment are highly toxic and can kill!
1. Type
2. Weight (kg)
3. Maximum tool diameter (mm)
4. Bore diameter (mm)
6
5. Speed of rotation (Rpm)
7
6. Serial Number
8
kW
7. Year of manufacture
8. Power (kW)
9
V
9. Voltage (V)
10
Hz
10. Frequency (Hz)
11
A
11. Current (A)
7
GB
GB
GB