ESAB Warrior Feed 304 Manuel D'instructions page 14

US
ASSURE THAT THE SIDE PANELS ARE CLOSED DURING OPERATION.
TO PREVENT THE REEL FROM SLIDING OFF THE HUB:
LOCK THE REEL IN PLACE BY TURNING THE RED
KNOB AS SHOWN ON THE WARNING LABEL
ATTACHED NEXT TO THE HUB.
Before threading welding wire, make sure the chisel point and burrs have been
removed from the end of the wire to prevent the wire from jamming in the torch
liner.
bm55d1a
- 14 -
© ESAB AB 2013