Installation; Selection Of Installation Equipment - AYA ATI4B Instructions D'utilisation

Installation

Selection of installation equipment

Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved
around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
work surface material to avoid larger deformation caused by the heat radiation from the
hotplate. As shown below:
H
D
X
B
L(mm) W(mm)
590 520
Under any circumstances, make sure the Induction cooker hob is well ventilated and the
air inlet and outlet are not blocked. Ensure the Induction cooker hob is in good work state.
As shown below.
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
L
X
H(mm) D(mm)
60 56
W
A
X
A(mm)
560
41
X
B(mm) X(mm)
490 50 mini