Functional Description; Initial Operation; Generally - Renkforce DK-9827 Notice D'emploi

7. Functional description

The code lock can be used as a doorbell, for access recognition at entrance doors, as a
controller for doors and garage door motors, and in many other applications.
The wide operating temperature range (-40 to +85 °C) and the waterproof construction
allows the device to be used in outdoor areas.
You use the keypad to program the code lock to suit your personal needs. For example,
you can program up to 100 user codes (4 - 8 digits) for output 1 and up to 10 user codes
(4 - 8 digits) for each of the outputs 2 and 3. You can allow each relay to remain on for
a programmed period of time, or explicitly open / close the relay with the user code.
Various security and entrance programming options are also available.
A sabotage contact on the basis of a magnet switch, that can be connected to an exis-
ting alarm system, saves the code lock from manipulations.

8. Initial operation

a) Generally
To ensure proper set-up and operation, please read the operating instruc-
tions and safety instructions carefully before using the device.
When choosing the installation location for your code lock, be aware that di-
rect intense sunlight, vibration, dust, extreme heat cold and jet water must be
avoided.
Devices emitting a strong magnetic field must be kept away from the device.
Devices emitting a strong electrical field, such as mobile telephones, radio
transmitters and electric motors, must also be kept away from the code lock.
This may adversely affect the functioning of the device.
Do not drill extra holes or screw any extra screws for mounting purposes into
the case. Contact with dangerously high voltages could become possible.
Be sure to follow the safety instructions of the tool manufacturer when using
tools to installing your device.
41