Tools And Materials - Dometic 300 Série Manuel D'installation

Pre-Installation
2 .6 .2 Required Specifications
Water Supply
Fitting
Static Water
Pressure
Recommended
Flow Rate
1
Minimum
Flow Rate
Discharge Floor
Flange ID
Discharge Floor
Flange Thickness
1 Water supply that exceeds 5.0 gpm (18.9 lpm) may require a
flow restrictor at the toilet inlet.
6
0.5 in. NPT
30–100 PSI
(206.8–689.5 kPa)
3–5 gpm
(11.4–18.9 lpm)
2 gpm (9.5 lpm)
3 in. (76 mm)
0.25–0.44 in.
(7–11 mm)

2 .7 Tools and Materials

Dometic recommends the following tools and
materials to install the product:
Required Tools and Materials
(Not Included)
Pliers,
Adjustable Wrench,
or Torque Wrench
Putty Knife (to remove
flange seal)
Optional Materials (Not Included)
4 - Floor Flange
Screws (8 preferred)
Screwdriver
Elbow Adapter
(depends on water
supply line)
Gravity-Flush Toilet
Small Bucket
Floor Flange
(must match the one
you are replacing)
Caulk (if installed in a
wet area)
Universal
Mounting Kit
EN