Child Lock Function; Before First Use; Daily Use - AEG LAVATHERM 75175AV Notice D'utilisation

12 www.aeg.com
•
4. Press the button (F) again and again
until the indicator of the correct level
comes on.
5. To confirm the adjustment, press and
hold buttons (A) and (E) at the same
time for approximately 2 seconds.

8.2 Child lock function

This option prevents children to play with
the appliance while a programme
operates. The programme knob and the
touchpads are locked.
Only OFF switch is unlocked.
Activating the child lock
option:
1. Use the programme knob to set any
programme.

9. BEFORE FIRST USE

Before you use the appliance for the first
time do these operations:
• Clean the tumble dryer drum with a
moist cloth.

10. DAILY USE

10.1 Start a programme
without delay start
1. Prepare the laundry and load the
appliance.
CAUTION!
Make sure that when you
close the door, the
laundry does not catch
between the appliance
door and the rubber
seal.
2. Set the correct programme and
options for the type of load.
The display shows the programme
duration.
the standard dry laundry
2. Wait approximately 8 seconds.
3. Press and hold touchpads (C) and (D)
at the same time. The child lock
indicator comes on.
The child lock indicator comes on.
It is possible to deactivate
the child lock option while a
programme operates. Press
and hold the same
touchpads until the child
lock indicator goes off.
8.3 Buzzer permanent off
To deactivate or activate the acoustic
signals, press and hold for approximately
2 seconds touchpads (A) and (B) at the
same time.
• Start a short programme (e.g. 30
minutes) with moist laundry.
The drying time you see is
related to the load of 5 kg
for cotton and jeans
programmes. For the other
programmes the drying time
is related to the
recommended loads. The
drying time of the cotton
and jeans programmes with
the load more than 5 kg is
longer.
3. Press the Start/Pause touchpad.
The programme starts.
10.2 Starting the programme
with delay start
1. Set the correct programme and
options for the type of load.
2. Press the delay start button again
and again until the display shows the
delay time you want to set.