Setting Child Lock; Starting The Programme - AEG LAVATHERM 59870 Notice D'utilisation

LONG ANTI-CREASE (ANTI-KREUK PLUS)
Prolongs standard anti-crease phase at the end of the drying cycle to 90 min. When ac-
tive the symbol
be removed at any time during the anti-crease phase.
TIME (TIJD)
Operates only with TIME PROGRAMME (TIJD) . Allows to set individual time of drying
from minimum 10 min. to maximum of 3 hours (in 10 min. steps).
1. Turn the programme dial to the TIME PROGRAMME (TIJD) .
2. Push the TIME (TIJD) button again and again until the desired programme duration is
shown in the display, e.g.
DELAY START (STARTUITSTEL)
Allows to delay the start of a drying programme from minimum of 30 min. to maximum
of 20 hours.
1. Select the drying programme and additional options.
2. Push the DELAY START (STARTUITSTEL) button again and again until the necessary de-
lay start is shown in the display, e.g.
3. To activate the delay timer, push the START PAUSE (START PAUZE) button. Time to
start elapses in the displayed.

Setting child lock

The child lock can be set to prevent a programme being accidentally started or a pro-
gramme in operation being accidentally changed. The child lock function locks all but-
tons and the programme dial. The child lock can be activated or deactivated by holding
down the LONG ANTI-CREASE (ANTI-KREUK PLUS) and BUZZER (ZOEMER) buttons at the
same time for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The padlock symbol
activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.

Starting the programme

Push the START PAUSE (START PAUZE) button (6). The programme is started.
The programme progress is shown in LCD by appropriate set of icons. From left to the
right, from iron dry
in case of cupboard dry programme the following status icons are visible:
. Current cycle progress is marked by flashing dash under status icon. When appropri-
ate part of drying cycle is accomplished dash becomes steady and appears flashing under
next status icon.
All manuals and user guides at all-guides.com
is on. This option helps to keep laundry free from creases. Laundry can
for a programme of 1 hour and 20 minutes.
appears in the display to indicate that the child safety device is
to anti-crease icon depends on the drying cycle chosen. E. g.
if the programme has to start after 12 hours.
93
Daily use