Labelling A Cd; Disc Memo - Sony CDX-MP30 Mode D'emploi

Labelling a CD

— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 15).
1
Start playing the disc you want to label
in a CD unit with the CUSTOM FILE
function.
2
Press (LIST/PTY) for 2 seconds.
Name edit mode
The unit will repeat the disc during the
labelling procedure.
3
Enter the characters.
1 Turn the VOL control dial to select the
desired characters.
(A y B y C y ··· Z y 0 y 1 y 2
y ··· 9 y + y – y * y/ y \ y
> y < y . y _ y A ···)
If you want to put a blank space
between characters, select "_."
2 Press (SEL) after locating the desired
character.
The next character flashes.
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to normal CD play mode, press
(LIST/PTY) for 2 seconds.
Tips
• Simply overwrite or enter "_" to correct or erase
a name.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with
a CD unit that has the function. The Disc Memo
will be stored in the memory of the CD unit with
the CUSTOM FILE function.
14
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT
information.
To Press
(DSPL) during CD/
View
CD TEXT disc playback
Erasing the Disc Memo
1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly to select the CD
unit storing the Disc Memo.
3
Press (LIST/PTY) for 2 seconds.
4
Press (DSPL) for 2 seconds.
5
Turn the VOL control dial to select the
disc name you want to erase.
6
Press (SEL) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST/PTY) for 2 seconds.
The unit returns to normal CD play mode.
Notes
• When the Disc Memo for a CD TEXT disc is
erased, the original CD TEXT information is
displayed.
• If you cannot find the Disc Memo you want to
erase, try selecting a different CD unit in step 2.