Accessories; Assembling The Stand - IKA C-MAG HS 4 Mode D'emploi

/// Spare parts order
When ordering spare parts, please give:
- device type.
- serial number, see type plate.
- position number and description of spare part, see www.ika.com.
/// Repair
Please only send devices in for repair that have been cleaned and are free of materials which might present health hazards.
For repair, please request the "Safety Declaration (Decontamination Certificate)" from IKA or use the download printout of it from
IKA website at www.ika.com.
If your appliance requires repair, return it in its original packaging. Storage packaging is not sufficient when sending the device - also use
appropriate transport packaging.

Accessories

• For further accessories see www.ika.com.

Assembling the stand

• Remove screw plugs (F).
• Remove the protective cap from the support rod.
• Put the washer between housing and nut.
• Screw the support rod onto the device by hand until the end
F
stop is reached.
• Use an A/f 17 spanner to tighten the M10 nut.
• Accessories should be attached using cross sleeves.
17