Technical Specifications - Bosch KTS 250 Manuel D'utilisation D'origine

en | 12 | KTS 250 | Maintenance
5.5.2 Recording data while driving
Some diagnostic functions and data recording capabili-
ties are only available while driving, e.g. in order to re-
cord events only occurring while driving.
WARNING
Driving safety and braking effect may be im-
paired by connecting cables in the vicinity of
the driver and the distraction involved in using
the device while driving. Death or serious in-
jury.
 Place, route and secure the KTS 250, and all
connecting cables so that they do not reduce
safety while driving and access to the brake
pedal.
 The KTS 250 may only be used by trained and
instructed workshop personnel.
 The KTS 250 must be operated by a person oth-
er than the driver while driving.
 During the data recording always observe the
legal requirements for road traffic.
---Separator---
1. Route the OBD connection cable 1 684 465 756 in-
side the vehicle in such a way that driving safety is
not impaired by the cable in the driver's vicinity.
Always comply with traffic regulations while re-
cording data.
2. The passenger must perform the data recording and
system supervision.
---Separator---
5.6 Software updating
Software updates are downloaded in the background
when an internet connection is active. Once the down-
load of a software update is finished, it will be offered
for installation in a pop-up message.
1. Start installation by tapping the pop-up message.
2. Read and follow the instructions on screen.
---Separator---
5.7 System recovery
If the current software version causes problems
or if the KTS 250 is to be sold, reset the KTS 250
to factory settings. This deletes all data and set-
tings from the KTS 250, e.g. license information,
log files, user settings, test protocols, images.
 Restore the system by following the instructions from
the KTS 250 Help Center.
For further information, see the KTS 250 Help
Center: " KTS 250 >>
Center".
---Separator---
1 689 989 370 | 2018-08-01
(main menu) >> Help
5.8 Opening the Help Center
For further information, see KTS 250 Help Center.
 Select " KTS 250 >> (main menu) >> Help Cen-
ter".
http://cdn.esitronic.de/KTS250/
helpcenter/start.htm
---Separator---
6. Maintenance
6.1 Cleaning
 Use only neutral cleaning agents and soft cloth to
clean the KTS 250.
Coarse workshop rags and abrasive cleaning
agents may damage the KTS 250 .
---Separator---
6.2 Spare parts
Denomination
<)
OBD connection cable, 1.8 m
Power supply unit
<)
USB connecting cable
<)
WLAN USB adapter
--Separator---
<)
Wearing part
---Separator---
7. Decommissioning
7.1 Changing location
 If the KTS 250 is passed on, all the documentation in-
cluded in the scope of delivery must be handed over
together with the unit.
 The KTS 250 is only ever to be transported in the orig-
inal or equivalent packaging.
 Heed the notes on initial commissioning.
 Before handing over, reset KTS 250 to factory set-
tings. See  12 "System recovery".
---Separator---
7.2 Disposal
 Dismantle the KTS 250 and sort out and dispose of
the different materials in accordance with the applica-
ble regulations.
 Proper disposal prevents environmental pollution and
health hazards.
The KTS 250 is subject to the European directive
2012/19/EU (WEEE).
---Separator---

8. Technical specifications

8.1 KTS 250 Specifications
Property
Display
Part number
1 684 465 756
1 687 023 736
1 684 465 491
1 687 010 590
Specification
7" LCD
(1024 x 600 pixels)
Robert Bosch GmbH