Hand Switch - Grasslin Talento 672 Mode D'emploi

12. Hand switch

You change – manually – the current switching state.
However, the individually set switching program is preserved.
1 for channel 1
2 for channel 2
= automatic
= OFF
= ON
The switching state
corresponds to the
entered program.
13. DCF 77 radio operation (only 3 and 6 modular spacings)
The time switch receives the time signal DCF77 with an
additional antenna.
! Refer to the separate instruction !
If the time switch is synchronized, the symbol
permanently on.
GB
= Manual mode
= ON
= OFF
You change
– m a n u a l l y –
the current switching
state.
The next switching
command in the
program is executed
automatically again.
FIX = continuous operation
FIX = Continuous ON
FIX = Continuous OFF
You change
– m a n u a l l y –
the current switching
state.
Only with the
do you switch from
continuous operation
back to Automatic
mode.
is
21
key