Grasslin Talento 672 Mode D'emploi page 39

17
Select free memory location:
Press the Prog key as often as
necessary until – –:– – appears.
Set the start time:
Set the day(s) of the week,
see 8
With the m key – minutes
With the h key – hours
Preselection for Cycle =
Mark the cycle switching command
with the key (press 2x)
Select the switching output:
With the key
CH1 and/or CH2
Confirm with the Prog key
Preselection for:
- Seconds
- Minutes
with the m key
Set the ON switching duration:
With the key 01...99
Confirm with the Prog key
GB