Safety: Use And Maintenance; Safety: Use; Safety: Maintenance; Ecology And Pollution - Castellari Olivance PN Manuel D'utilisation Et D'entretien

2.3. Safety: use and maintenance

2.3.1. Safety: use

-
Before carrying out any work on the machines, make sure that the power supply is
disconnected and that the pole is also disconnected from the machines.
- The zone in which the machines is used is to be considered a "Danger zone" (i.e. a
zone in proximity to which the presence of an exposed person constitutes a risk to
the health and safety of that person). This rule is particularly important for persons
not trained to use the machines.
- The area around the machines work zone must always be kept clean and free from
any obstructions. Make sure no persons or animals are in the area of machines
operations.
- When a person is "exposed", that is, in a "danger zone", the operator must
immediately stop the machines and ensure that person leaves the danger zone.
-
When the machines are running, the worker must maintain a position that will allow
complete control of the machines so that appropriate action can be taken according
to circumstance.
-
Before leaving the machines unattended make sure the power supply is detached.
- Periodically check the machines is in good working order, safety devices included.

2.3.2. Safety: maintenance

-
Before carrying out any work on the machines, make sure the power supply is
disconnected.
- Maintenance tasks must always be carried out by personnel qualified for such
tasks.
-
At the end of maintenance/repair work the technician must make sure that the work
has been completed, the safety devices re-enabled and the covers re-fitted before
restarting the machine.
-
Use of appropriate personal protection equipment during maintenance/repair work
is compulsory. Such equipment includes:
Gloves
Adjustments must be carried out by one worker only; when adjustment work is being
carried out access to the machine by unauthorised personnel is prohibited.
Prevent dust deposits on the machines, especially on intake filters.

2.4. Ecology and pollution

2.4.2. Waste management

Use and maintenance of the machines generate waste products that must be
disposed of in compliance with the laws in force in the country where the machine is
used.
The user must comply with the instructions regarding routine use, cleaning
and maintenance of the machine provided by the manufacturer.
Any special waste must be disposed of by specialised firms authorised to do so.
Ensure waste is disposed of properly by requesting a "waste disposed of securely"
receipt.
For information on how to dismantle the machine see section 4.4.
28
OLIVANCE PN - PN S - PN T - PN X - PN XT
Hard hat
Castellari S.r.l. • Via Lasie 16/E
Ear protection
• IMOLA (BO)
Anti-slip footwear
with steel toecaps
28