Télécharger Imprimer la page

Safety And Prevention; Safety Signs (Pictograms); General Safety Regulations; Safety: Use And Maintenance - Castellari Tornado-v3-tp-v3 Manuel D'utilisation Et D'entretien

Peigne électrique

Publicité

2. SAFETY AND PREVENTION

It is important to read this manual carefully: doing so will minimise the risks associated
with incautious or improper use of the machine described in this manual.
The user must provide the operator with training on the risks associated with use of the
machine, safety devices and the general accident prevention regulations in force in the
country of use.

2.1. Safety signs (pictograms)

Dangerous situations associated with use of the machine are illustrated by way of the
symbol shown below:
The same symbol is used on the machine itself to highlight potential residual risks that,
despite the adoption of all possible safety standards during the making of the machine,
still exist under certain working conditions.
NOTE: On-machine signs must be kept clean at all times; they must be clearly legible
so that users can identify situations of risk during use as quickly as possible.

2.2. General safety regulations

The personnel shall:
-
always use the personal protection equipment required by law and follow the
instructions given in this manual,
-
observe all information / warning signs regarding machine-relevant dangers,
-
not carry out, on their own initiative, work on the machine that is outside the scope
of their duties,
-
inform their superior of any problems or danger situations that may arise.
-
The machine must only be used for the purpose for which it was designed.
-
The machine must not be run with the covers removed: safety guards/devices must
not be removed or disabled.
NOTE: Do not wear loose, flapping clothing as it could be caught up in the
moving parts of the machine. It is important to use suitable clothing. Workers
must not carry secateurs or sharp tools in pockets. It is forbidden to remain or
transit within the machine operating range.

2.3. Safety: use and maintenance

2.3.1. Safety: use

-
Before starting the machine make sure all safety devices / covers are in proper
working order.
-
The zone in which the machine is used is to be considered a "Danger zone" (i.e. a
zone in proximity to which the presence of an exposed person constitutes a risk to
TORNADO CARBON V3 - TP V3
Castellari S.r.l.
Via Lasie 16/E
IMOLA (BO)
25
25

Publicité

loading