Becker Centronic SunWindControl SWC545 Notice De Montage Et D'utilisation page 37

PROGRAM
(Switching time st or blocking time st)
1. Press the MENU button.
2. To select the PROGAM menu press the + button until PROGAM appears.
Note
The FUNCTION menu can be used to choose between switching times
and blocking times.
Programming will not take effect if the sign: --:-- is showing on your
display. (--:-- is located between 23.59 and 00:00)
3. Press OK to confirm. SWITCHING TIME t/BLOCKING TIME t appears.
4. Now set the desired SWITCHING TIME t/BLOCKING TIME t and the
SWITCHING TIME s/ BLOCKING TIME s using the +/- buttons. Press OK to
confirm.
5. Press the MENU button to return to operating mode.
PROGRAM
SWITCHING TIME ▼ SWITCHING TIME ▲
PROGRAM
de
en
fr
nl
37