General; Warranty; Safety Information - Becker Centronic SunWindControl SWC545 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
The SWC545, which is pre-programmed ex works with the current date and time
(CET), operates your sun protection system on the basis of sunlight intensity
and wind speed.
The SWC545 can be operated manually at any time.
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
Danger
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries with an identi-
cal type (LR 03; AAA) only.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
26

General

Warranty

Safety Information