Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting

This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the information
below, visit www.philips.com/support or in the U.S. or Canada only, call
1-866-309-8817 for assistance.
The appliance does not sound after the plug is put in the wall outlet.
• The plug is not connected properly, or the outlet is not connected to power source.
Check whether the power plug is plugged correctly and the outlet is working properly.
The appliance does not start the pasta making process after the plug is put
in the wall outlet.
• You have not chosen a pasta making program or pressed the start button
Choose a pasta making program and press the start button
After pressing the start button
and does not work.
• The chamber lid is not assembled properly.
Make sure you follow the user manual to assemble the chamber lid properly.
The chamber lid is pushed open from the inside.
• There's too much flour in the mixing chamber.
The maximum amount of flour for each batch is 400g. If you have put more than 400g of flour
in the mixing chamber, reduce the amount and make another batch of pasta.
• The ratio of flour and water provided in the "Flour/water ratio table" was not followed. The
dough is too wet.
Disconnect from the power source, clean the pasta maker, and follow the user manual again to
restart the pasta making.
• The chamber lid is not assembled properly.
Make sure you follow the user manual to assemble the chamber lid properly.
English
26
.
, the appliance makes alarm sounds
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hr2371Hr2372

Table des Matières