VESTEL VHDA55CS Mode D'emploi page 44

12. Connect the power plug to an earthed wall socket.
13. Use a spirit level to make sure that the cooker hood is horizontal.
14. For inclined models, use the four ST4 x 30mm screws to attach the cooker
hood to the wall. Tighten the screws.
15. Choose one of the following options:
• When the cooker hood is used without an expansion pipe (recirculation):
Make sure that the carbon filter is placed.
o
• When the cooker hood is used with an expansion pipe:
a. Make sure that the carbon filter is removed.
b. Attach the two v-flaps to the outlet.
44 | VESTEL VHDA55CS-VHDA80CS