How To Install The Product - VESTEL VHDA55CS Mode D'emploi

• 1 x outer chimney
• 1 x inside chimney bracket
• 1 x outside chimney bracket
4.2

How to install the product

Tools required:
• Pencil
• Drill (8mm)
• Crosshead screwdriver
• Spirit level
To install the product:
1. Make sure that the power cable is disconnected from the wall socket.
2. Determine the position of the four holes on the wall. NOTICE The minimum
distance between the supporting surface of the cooking appliance and the
lowest part of the cooker hood must be:
a. Gas cookers:
b. Electric cookers:
c. Coal or oil cookers:
3. Drill the four holes in the wall with the 8 mm drill.
4. Insert the three wall plugs
5. Attach the suspension bracket to the wall plugs with the three ST4 x 30mm
screws.
40 | VESTEL VHDA55CS-VHDA80CS
70 cm
70 cm
80 cm