Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Application range
Crimping force
Rated operating pressure
Dimensions
Weight (without dies)
Recommended oil
Advancing speed
Safety
2. INSTRUCTIONS FOR USE (Ref. to figs. 1 and 2)
2.1) Operating positions
The three operating positions are identified on the main handle, which
rotates relative to the reference symbol,
3
1. GENERAL CHARACTERISTICS
Suitable for compression of electrical connectors on conduc-
kN (sh ton)
bar (psi)
with handles closed 473 x 144 mm (18.6 x 5.7 in.)
mm (inches)
with handles open 473 x 344 mm (18.6 x 13.5 in.)
kg (lbs)
The tool has a twin speed operation and automatically
switches from a rapid advancing speed of the ram to a slower
The tool is provided with a max pressure valve; MPC1 special
manometer, is available as an optional accessory to check the
(see Fig. 1).
Rest position (Handles locked): lock handles togethe when tool is
not in use.
Release position: close the moveable handle (10) against the main
handle (1), in order to discharge the oil pressure and retract the
dies.
Operating position: operate the moveable handle (10), to build up
pressure and close the dies.
tors up to 400 mm
(800 MCM)
2
130 kN (14.6 sh ton)
700 bar (10,000 psi)
5,5 kg (12.1 lbs)
ENI ARNICA ISO 22
more powerful crimping speed
proper setting of the valve.
Publicité
Table des Matières
