Changing Bacnet Values - Honeywell 301C Manuel De L'utilisateur

The first of these screens allows you to configure the identification and
address:
BACnet ID:
Static IP address: This is an address that is continually assigned to a

Changing BACNet values

• Use the keypad arrows to scroll down to select the desired line and
press Enter to select it.
• Selecting BACnet ID activates the field and you can increase or
decrease the ID value (0-4194303) using the up or down keypad
arrows
If you select the Static IP address option, the following screen appears.
All controllers are shipped with a preset IP address as shown in the
example below.
510324
4/07
9. BACNet
-Device-
BACnet ID : 1
Static IP address
(Building Automation and Control Networks) is the
identification number assigned to this particular
controller on a network.
specific controller (rather than addresses that are
recycled when no longer in use)
-IP address-
192.168.
-Network mask-
255.255.255.
301C User Manual
Honeywell
System Programming
1.254
0
Bacnet Menu
75