Use And Operation; Recommendations For Use; Description Of Controls - Ndustrio 091CP1E Manuel D'utilisation Et D'installation

RECOMMENDATIONS FOR USE

Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls

DESCRIPTION OF CONTROLS

The appliance is fitted with the controls for use of its
main functions.
A)Heating element control knob: for turning the
heating elements off and on and setting their lev-
el.
B)Water control knob: for filling the well in the various
ways available.
C)Mains light: indicates that the appliance is receiving
electrical power.
B

USE AND OPERATION

Manual filling mark
Off marker
Minimum power
marker
Slow automatic
filling mark
Quick automatic
filling mark
and the main functions. Use only as intend-
ed by the constructor and never tamper
with any device to obtain performance lev-
els outside the rated specifications. Before
use, check that the safety devices are prop-
erly installed and in good working order. As
well as taking care to meet these require-
ments, users must also implement all safe-
ty regulations and read the description of
the controls and the start-up procedure
carefully.
D)Heating element pilot light: indicates that the
heating elements have switched on after the
well has filled
E)Thermostat light: indicates that the safety
thermostats have tripped. The light goes out
once the appliance has been reset.
E
C
D
Low power marker
A
- 7 -
Off marker
B
A
Full power
marker
4
IT
GB
DE
FR
ES
E
C
D
IDM-39615600500.tif
English