General Information; Information For The Reader; Purpose Of The Manual - Ndustrio 091CP1E Manuel D'utilisation Et D'installation

To find the specific topics of interest to you quickly,
refer to the index at the start of the manual.
This manual is subdivided into two parts.
1st part: contains all information necessary
for general readers, i.e. for users of the appli-
ance.
2nd part: contains all the information neces-
sary for special categories of reader, i.e. all
skilled operators authorised to handle, trans-
port, install, service, repair and scrap the ap-
The constructor has produced this manual, which
forms an integral part of the appliance, to provide
the necessary information for those authorised to
interact with it during its working life.
As well as adopting good practices for use, the
manual's intended readers must read it thor-
oughly and apply its instructions to the letter.
The constructor supplies this information in its
own language (Italian), but it may be translat-
ed into other languages to meet legal and/or
commercial requirements.
A little time taken to read this information will allow
the prevention of risks to health and safety, and the
IT IT
risk of economic losses.
Keep this manual in a clearly identified safe place
GB GB
throughout the working life of the appliance, so that it
will always be available when required for consultation.
DE DE
The nameplate shown here is fitted directly to the
FR FR
appliance. It contains references and all essential
information for operating safety.
ES
ES
Q
English

GENERAL INFORMATION

INFORMATION FOR THE READER

PURPOSE OF THE MANUAL

IDENTIFICATION OF CONSTRUCTOR AND APPLIANCE
A B C
L M N P
pliance.
While users are instructed to refer to the 1st part on-
ly, the 2nd part is addressed to skilled operators.
They may also read the 1st part for a more com-
plete picture of the information provided if neces-
sary.
The constructor reserves the right to make changes
without any obligation to provide any prior notice.
A number of symbols have been used to highlight
particularly important parts of the text or important
specifications. Their meaning is as defined below.
Caution - warning
Indicates that suitable procedures must be
adopted to avoid putting people's health and
safety at risk or causing economic losses.
Important
Indicates particularly important technical
information which must not be overlooked.
A)Appliance model
B)Type of customisation
C)Constructor identification
D)Insulation class
D E F
- 2 -
S G H
R
IDM-3961440310.tif
1