Safety Devices; Caution - Warning; Safety And Information Signs - Ndustrio 091CP1E Manuel D'utilisation Et D'installation

Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
The illustration shows the position of the devices.
A)Safety thermostat: to cut off the electricity sup-
ply in case of overheating.

Caution - warning

Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs
provided.
A)Nameplate with manufacturer and appli-
ance data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: read the manual carefully be-
fore carrying out any procedure.
D)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
IT
IT E)General hazard: dry operation is forbidden.
F) General hazard: all relevant regulations must be
complied with. "Install in compliance with the rele-
GB GB
vant regulations and use in well ventilated premises
only".
DE DE
G)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
FR FR
ure to comply with the installation and commission-
ing instructions".
H)CE marking: indicates that the appliance is compli-
ES
ES
ant with the relevant norms.
L) WEEE symbol: indicates that the appliance is sub-
ject to specific waste disposal regulations.
English

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

A
D C E
- 4 -
IDM-39615600200.tif
H
G
F
IDM-39615600300.tif
A
L
B