Switching The Voltage Converter On/Off - AEG ST 500 Mode D'emploi

note:
▪
The power rating of an external device is indicated on the technical label which is affixed to the particular external
device. external devices such as electric motors, e.g. drills, electric saws, refrigerators and music systems usually
have a greater power rating at the start up than is specified on the technical label.
▪
If the power rating is only given in amps, simply multiply the a value by the factor 230 to obtain the equivalent in
watt. For example: 0.4a x 230 = 92 watts
▪
remember the vehicle's battery will be discharged when the vehicle is not running.

Switching the voltage converter on/off

push the power button (9 or 19). If the green led (7, 20) lights up, the voltage converter is ready for use. The display
will alternate between "0" and the "Input voltage" value.
note: The voltage converter can only be switched off using the remote control module if also used to switch it on.
230 V power output socket
use only external devices equipped with either protective contact plugs or european spade connectors.
1. Switch on the power inverter.
2. Connect the plug of an external device to one of the power inverter's 230 V outlets (6).
2.0 USB output socket
1. Switch on the power inverter.
2. plug an external uSB device into the uSB port (10).
The uSB output on this power inverter provides a power supply of 5 V dC for external uSB devices (e.g. lights, fans,
radios).
note:
▪
The uSB output on the power inverter is not designed for transferring data.
▪
do not connect memory sticks, Mp3 player or similar data storage external appliances.
GB 27