Technology; Installation & Connection; Preparation; Voltage Converter Installation - AEG 10057 Mode D'emploi

24 www.aeg-automotive.com
1. Red connection (+)
2. Black connection (-)
3. Mounting rail
4. Fan cover
5. 230 V Socket
6. Output socket LED, green
7. Error LED, red
8. Power LED, green
9. uSB port
10. Power button
11. Black cable with lugs (-)
12. Red cable with lugs (+)
13. Cordless remote control module
14. On/Off button (cordless remote control module)

TEChNOLOGy

Attention!
Check the properties of the device to be powered
before using the voltage converter to prevent con-
sequential damage.
There are pure or modified sinusoidal wave voltage
converters.
Model
Modified sinu-
1000 W,
soidal wave
1500 W
Pure sinusoi- -
dal wave
for connecting
(examples)
• Power drills
• Computers
• hobs
• Lamps,
• Fans/vents
• Lawn mowers
in addition to the
modified sinusoidal
wave examples
• Coffee makers
• Shavers
• Audio amplifiers
INSTALLATION &
CONNECTION

Preparation

Attention!
•
Before connecting the voltage converter you must
check the terminals on the vehicle's battery. The
voltage converter must not be used with vehicles
where the positive terminal „+" is connected to a
metal part of the vehicle.
•
Only use the included cables with lugs to connect
to the 12 V direct current supply (e.g. automotive
battery). If the cables included are too short you
may also use insulated copper cables available
from speciality retailers.
•
Keep the cable length as short as possible. The
suitable cable diameter must be selected ac-
cording to the length of the cable between the
inverter and the power source. When in doubt
please contact a speciality retailer.
•
Remember the vehicle's battery will be discharged
when the vehicle is not running.

Voltage converter installation

Install the power inverter with suitable screws (not
included):
•
in sturdy and even locations,
•
on clean, dry and non-flammable surfaces,
•
in well ventilated areas.
Please be sure not to cover the vents.

Connection to the power source

Caution!
We urgently advise having an electrically skilled
person connect the cable to your vehicle's electrical
system. Modern vehicles feature complex electrical
components. Working with such connections can
be dangers for laymen. An incorrect connection can
damage your vehicle and cause situations hazard-
ous to you and other persons.
Once connected the unit may sound an alarm, which
is normal.