Hama 00095266 Mode D'emploi page 45

3. After connecting the sensors to the digital picture frame, switch
the main ON/OFF switch to the "ON" position.
selection menu of the digital picture frame will appear. Now use
the < / > buttons to choose the function Weather Station, and
press ENTER. The weather station will appear.
NOTE:
► Please note that it can take up to five minutes for the correct
values of the indoor and outdoor temperature to be displayed.
4. Changing the display from °C to °F
While the weather station is being displayed, simply
press the arrow key „▲" on your remote control to easily
change the temperature units between °C and °F.
5. By pressing the ENTER key on your remote control,
you can switch between the display for:
- Indoor and outdoor temperature
- Indoor temperature only
The function
GB
45