Check Accumulation; Clear Accumulation; Parameters Setup - Gram C6 Série Manuel D'utilisation

Check accumulation

At weighing mode, press
accumulation, after then back to normal weighing mode automatically.

Clear accumulation

At weighing mode, press
mode which means clear the current accumulation.

PARAMETERS SETUP

In weighing status, hold
mode, all the setting in this mode should be recorded with the calibration
header on; or the data will lose.)
P1~P13 parameters are available, press
select parameter. Detail for parameter:
1. P1 x
X=1:
X=2:
2. P2 x
3. P3 x
X=1:
X=2:
X=2:
X=2:
8
, it will display the times and the value of current
, it displays "ADD---" and back to weighing
for more than 5s and entering setup mode. (P
kg Lb shift
kg mode (default)
Lb mode
Not available for this model
Baud rate setup
9600 (default)
4800
2400
1200
to switch, and press to