Product Description And Specifications - Bosch GOP 14,4/18 V-EC Professional Notice Originale

OBJ_BUCH-1808-002.book Page 15 Tuesday, April 7, 2015 4:33 PM
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
 Wear protective gloves when changing application
tools/accessories. Application tools/accessories become
hot after prolonged usage.
 Do not scrape wetted materials (e.g. wallpaper) or on
moist surfaces. Penetration of water into the machine in-
creases the risk of an electric shock.
 Do not treat the surface to be worked with solvent-con-
taining fluids. Materials being warmed up by the scraping
can cause toxic vapours to develop.
 Exercise extreme caution when handling the scraper.
The accessory is very sharp; danger of injury.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sawing and cutting wooden mate-
rials, plastic, gypsum, non-ferrous metals and fastening ele-
ments (e. g., unhardened nails, staples). It is also suitable for
working soft wall tiles, as well as for dry sanding and scraping
of small surfaces. It is especially suitable for working close to
edges and for flush cutting. Operate the power tool exclusive-
ly with Bosch accessories.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Venting slots
3 Battery unlocking button
4 Thumbwheel for orbit frequency preselection
5 Battery pack*
6 Battery charge-control indicator*
7 Button for charge-control indicator*
8 SDS lever for releasing the application tool
9 Tool holder
10 Handle (insulated gripping surface)
11 Plunge saw blade*
12 Sanding plate
13 Sanding sheet*
14 Felt ring of the dust extraction*
Bosch Power Tools
15 Retaining clip of the dust extraction*
16 Vacuum connection*
17 Dust extraction*
18 Vacuum hose*
19 Extraction adapter*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Multi-Cutter
Article number
Rated voltage
No-load speed n min
0
Oscillation angle, left/right
Weight according to
EPTA-Procedure 01/2003
Permitted ambient
temperature
– during charging
– during operation** and
during storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80 dB(A); Sound power level 91 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-4:
2
Sanding: a =3.5 m/s , K=1.5 m/s
h
Sawing with plunge cut saw blade: a
2
K=1.5 m/s ,
Sawing with segment saw blade: a
2
Scraping: a =8.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
English | 15
GOP 14,4/18 V-EC
3 601 HB0 0..
V= 14.4/18
-1
8000–20000
° 1.4
kg 1.7/1.7*
°C 0...+45
°C –20...+50
GBA 14,4V ...
GBA 18V ...
AL 18..
GAL 3680
2
,
2
=9.7 m/s ,
h
2 2
=6.0 m/s , K=1.5 m/s ,
h
2
.
1 609 92A 117 | (7.4.15)