Beurer WL 50 Mode D'emploi page 37

To set the alarm on the device, proceed as follows:
1. Press and hold either the Alarm 1 or Alarm 2 button for two seconds, depending on which
alarm memory space you would like.
2. The alarm hour flashes on the display.
Use the or
3. The alarm minute flashes on the display.
Use the or
firm.
4. Use the or
confirm.
= Wake-up melody 1 (Melody with bird calls)
DAY
= Wake-up melody 2 (Chimes)
BELL
= Beep
BEEP
= Radio (most recently set radio station and volume)
FM
--- = No tone
5. Use the or
ton to confirm.
= 30-minute sunrise duration
5- 30
= 20-minute sunrise duration
5- 20
button to set the alarm hour. Use the
button to set the alarm minute. Use the
button to set the desired alarm tone. Use the
button to set the desired sunrise duration. Use the
37
button to confirm.
OK
button to con-
OK
OK
button to
OK
but-