Beurer WL 50 Mode D'emploi page 35

Operation with USB mains adapter
1. Place the device near an easily accessible socket.
2. Connect the USB mains adapter to the micro USB cable.
3. Insert the micro USB cable into the micro USB port on the rear of the device.
4. Insert the USB mains adapter into a suitable socket. The AUX cable functions as an antenna.
On | Off
5. Slide the
6. The time 00:00 is shown on the device display. The device is now ready for use.
Battery use / Charging the battery
1. Before using the device with the battery, you must charge the battery.
2. Connect the USB mains adapter to the micro USB cable.
3. Insert the micro USB cable into the micro USB port on the rear of the device.
4. Insert the USB mains adapter into a suitable socket. Whilst charging, the small red light next
to the micro USB port on the rear of the device will light up.
5. As soon as charging is complete, the small red light next to the micro USB port will go out. A
complete charging process lasts for approx. 4 hours.
6. Pull the USB mains adapter and the USB cable out of the socket and the device. The device
can now be operated with the battery.
On | Off
7. Slide the
8. The time 00:00 is shown on the device display, along with the current battery state .
switch on the rear of the device to the "On" position.
switch on the rear of the device to the "On" position.
35