Setting The Color Temperature - Sony TN-1885T Mode D'emploi

Adjusting the Convergence
The adjustment data becomes the common setting for all
input signal received.
1
Press the button.
The OSD (On Screen Display) appears.
2
For vertical adjustment
Press the ¨ ./ > buttons.
. . . . to move Red down and Blue up
> . . . to move Red up and Blue down
For horizontal adjustment
Press the > ?// buttons.
? . . . to move Red to the left and Blue to the right
/ . . . to move Red to the right and Blue to the left
To erase the OSD, press the
The OSD automatically disappears 10 seconds after
you release the buttons.
To reset, press the ? (reset) button while the OSD is on.

Setting the Color Temperature

The selected color temperature becomes the common setting
for all input signals received.
1
Press the (option) button.
The option OSD (On Screen Display) appears.
2
Press the > / button.
The color temperature OSD appears.
3
0 23
button again.
To erase the OSD, press the
The OSD automatically disappears 30 seconds after you
release the buttons.
To reset, press the ? (reset) button while the OSD is on.
1 2
80.0KH / 75H
Z Z
9300K
1 2 3
R 76
G 66
B 55
Adjust with the > ?// and ¨ ./> buttons.
There are three color temperature modes on the OSD.
The factory settings are 1 : 5000K, 2 : 6500K, and 3 :
9300K.
To select 5000K, 6500K or 9300K
Press > ?// buttons.
To obtain the desired color temperature
1 Press > ?// buttons to select the 1, 2 or 3 mode.
2 Press ¨ ./> buttons to select R, G or B.
3 Press > ?// buttons to adjust the color
temperature.
The "5000K," "6500K" or "9300K" disappears.
The new color temperatures are memorized for each
of the color modes -1, 2, 3.
button again.
9300K
EN
1 2 3
R 76
G 66
B 55
7