Noise/Vibration Information; Changing The Tool - Bosch GOP 30-28 Professional Notice Originale

Multi-cutter
Orbital stroke rate preselection
Rated power input
No-load speed n
0
Oscillation angle on left/right
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-4:
h
Sanding:
a
h
K
Cutting with plunge cut saw blade:
a
h
K
Cutting with segmential saw blade:
a
h
K
Scraping:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Bosch Power Tools
GOP 30-28
●
W 300
−1
min 8000–20000
° 1.4
kg 1.5
/ II
GOP 30-28
dB(A) 81
dB(A) 92
dB 3
2
m/s 2
2
m/s 1.5
2
m/s 10
2
m/s 1.5
2
m/s 6.5
2
m/s 1.5
2
m/s 4.5
2
m/s 1.5
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
Pull the plug out of the socket before carrying out any
u
work on the power tool.

Changing the tool

Wear protective gloves when changing tools. There is
u
a risk of injury when touching the application tools.
Selecting an application tool
Please observe the application tools intended for your power
tool.
English | 19
GOP 40-30 GOP 55-36
●
400
8000–20000 8000–20000
1.5
1.5
/ II
GOP 40-30 GOP 55-36
80
91
3
3
1.5
11 10.5
1.5
6.5
1.5
6
1.5
1 609 92A 5NS | (22.06.2020)
●
550
1.8
1.6
/ II
81
92
3
3.5
1.5
1.5
6.5
1.5
6.5
1.5