Bosch GOP 30-28 Professional Notice Originale page 20

20 | English
Application tool
The following table shows examples of application tools. You can find additional application tools in Bosch's extensive range of
accessories.
Application tool
AIZ 10 AB
Starlock
10 × 20 mm bi-
metal plunge cut
saw blade for wood
and metal
AIZ 32 EPC
Starlock
32 × 50 mm HCS
plunge cut saw
blade for wood
PAIZ 32 APB
StarlockPlus
32 × 60 mm bi-
metal plunge cut
saw blade for wood
and metal
MAIZ 32 APB
StarlockMax
32 × 80 mm
plunge cut saw
blade for wood and
metal
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
PAIZ 45 AT/
PAIZ 45 AIT
StarlockPlus
45 × 50 mm
carbide plunge cut
saw blade for metal
PAII 52 APT/
PAII 52 APIT
StarlockPlus
52 × 50 mm
carbide plunge cut
saw blade for
multi-material
1 609 92A 5NS | (22.06.2020)
GOP 30-28 GOP 55-36 Application tool
GOP 40-30
Material
Softwood, soft plastics,
gypsum, thin-walled alu-
minium and non-ferrous
metal profiles, thin metal
sheets, non-hardened
nails and bolts
Softwood
Composite materials
made from wood and soft,
non-ferrous metals, un-
hardened nails and bolts,
pipes made from non-fer-
rous metal and profiles of
smaller dimensions
Composite materials
made from wood and soft,
non-ferrous metals, un-
hardened nails and bolts,
pipes made from non-fer-
rous metal and profiles of
smaller dimensions
Hardwood, laminated
boards
Hard ferrous metals, ex-
tremely abrasive materi-
als, fibreglass, plaster-
board, cement-bonded
fibreboards, hardened
nails and screws
Hard ferrous sheet metal,
epoxy, plasterboard,
GFRP, CFRP, cement
fibreboard
Application
Smaller separation and plunge cuts; delicate adjustment
work in wood;
Example: Cutting recess for cable, plunge cuts in gypsum
boards, resawing recesses for locks and fittings
Splinter-free separation and plunge saw cuts thanks to
round sawing edge (Curved-Tec);
also for sawing close to the edge, in corners and difficult-
to-access areas;
Example: Plunge cut for the installation of a ventilation
grille or recess for plug sockets
Quick and deep plunge cuts in wood, abrasive wooden ma-
terials and plastics, splinter-free work thanks to round cut-
ting edge (Curved-Tec);
Example: Quick separation of non-ferrous pipes and pro-
files of smaller dimensions, easy cutting through non-
hardened nails, bolts and steel profiles of smaller dimen-
sions
Splinter-free, flush and very deep cuts and plunge cuts in
wood thanks to round cutting edge (Curved-Tec), soft and
non-ferrous metals and plastic;
Example: Recess for plug sockets and pipes, cutting
through non-hardened nails and bolts when flush with the
surface, sawing through window frames
Splinter-free separation and plunge cuts in coated boards
or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
Wide saw blade for sawing highly abrasive materials or
hard ferrous metals; long service life thanks to BOSCH
carbide technology;
Example: Cutting kitchen front covers, easy sawing
through hardened screws and stainless steel
Long saw blade for splinter-free separation and plunge
cuts in sheet metal thanks to round sawing edge (Curved-
Tec); long service life thanks to BOSCH carbide techno-
logy;
Example: Cutting through sheet metal, cutting through
screws in window frames
GOP 30-28 GOP 55-36
GOP 40-30
Bosch Power Tools