EINHELL KH 1500 Mode D'emploi D'origine page 11

Anleitung_KH_1500_SPK7__ 04.03.14 10:35 Seite 11
11. Troubleshooting
If the equipment is operated properly you should experience no problems with malfunctions or faults. In the
event of any malfunctions or faults, please check the following before you contact your customer services.
Fault
Equipment does not work
The equipment does not heat
Possible cause
Power plug is not connected
Topple cut-out switch not pressed
Overheating guard has been
triggered
Remedy
Connect the power plug
Place the machine on a level
surface.
Please note section 7.3
GB
11