Display Barometric Pressure And Barometric Pressure Curve - Conrad 51 54 74 Notice D'emploi

Selecting unit for the Barometric Pressure
• Use the button „CHANNEL/+/SEARCH" (3) or „MEM/-" (4) to choose between „hPa" (hectopascal), „mb" (millibar),
„inHg" (inch mercury column) and „mmHg" (millimetres mercury column).
• Briefly push the button „MODE/SET" (2). The unit for the barometric pressure flashes.
Setting the barometric pressure
• If you know the current barometric pressure at the site of setup of the weather station, you can set it with the button
„CHANNEL/+/SEARCH" (3) or „MEM/-" (4). You can set either the absolute or relative barometric pressure.
Usually, you will get the current value online.
Observe that the icon for the weather forecast must be set before the barometric pressure.
• Briefly push the button „MODE/SET" (2) to terminate setting mode.
c) Display Barometric Pressure and Barometric Pressure Curve
• Briefly push the „PRESSURE/ " button (6).
Then the current barometric pressure is displayed in the upper right of the display. The lower left of the display
shows a graphic display of the barometric pressure curve of the last 6 hours.
• Briefly push the button „PRESSURE/ " (6) again to display the time again.
45