Inventum MN3018C Manuel D'utilisation page 36

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. To select the convection temperature:
a. Push the cooking button.
b. Turn the selection knob.
Note:
The temperature can be set from 140°C to 230°C.
4. Push the start button to confirm the temperature.
5. Turn the selection knob to adjust the cooking time.
Note:
The maximum cooking time is 95 minutes.
6. Push the start button to start the appliance.
USING THE MULTI-STAGE COOKING FUNCTION
You can use the multi-stage cooking function to set a maximum of two stages at one time. The buzzer sounds one
time after each stage is finished and when the next stage starts.
Note:
You cannot set the kitchen timer, auto menu or preheating as a stage.
Note:
If you use the defrost function as a stage, this function must be the first stage.
The procedure shows an example to defrost food for 5 minutes and then to cook the food with 80% microwave power
for 7 minutes.
1. Push the defrost button two times. The display shows 'dEF2'.
2. Turn the selection knob to adjust the defrost time.
3. Push the cooking button. 'P100' flashes on the display.
4. Push the start button to confirm the function. The display shows 'P100'.
5. Turn the selection knob to the desired microwave power.
6. Push the start button to confirm the power. The display shows the selected power setting (in this example 'P80').
7. Turn the selection knob to adjust the cooking time.
8. Push the start button to start the appliance.
USING THE QUICK START FUNCTION
Using the start button
1. Push the start button to start cooking on full power for 30 seconds.
2. During cooking, push the start button again to add 30 seconds to the cooking time.
Each push of the button adds 30 seconds.
Using the selection knob
1. Turn the selection knob clockwise to immediately set the cooking time.
2. Push the start button to start cooking on full power.
USING THE AUTO MENU
For an overview of the available auto menus, refer to section
1. Turn the selection knob counter-clockwise to select an auto menu. The display shows the selected menu 'AX' (X
indicates the menu number).
2. Push the start button to confirm the menu.
36
English
'Auto menus'
.

Publicité

Table des Matières
loading

Table des Matières