For Your Safety; General Safety Statements; Definitions Of Alert Icons; Product Overview - Dräger HPS 3500 Notice D'utilisation

For your safety

1 For your safety
1.1

General safety statements

Before using this product, carefully read these Instructions

for Use and those of the associated products.
Strictly follow the Instructions for Use. The user must fully

understand and strictly observe the instructions. Use the
product only for the purposes specified in the Intended use
section of this document.
Do not dispose of the Instructions for Use. Ensure that they

are retained and appropriately used by the product user.
Comply with all local and national rules and regulations

associated with this product.
Only trained and competent personnel are permitted to

inspect, repair and
recommends a Dräger service contract for all maintenance
activities and that all repairs are carried out by Dräger.
Only authentic Dräger spare parts and

accessories may be used for maintenance. Otherwise the
proper functioning of the product may be impaired.
Do not use a faulty or incomplete product. Do not modify

the product. The product must not be fitted with third-party
components.
Notify Dräger in the event of any product or component

fault or failure.
Incorrect or third-party inner fittings, the drilling of new

holes for accessories or other modifications to the helmet
may adversely affect the protective function and invalidate
any approval.
When fitted with another item of personal protective
equipment or with an accessory other than as supplied by
the helmet manufacturer for use with this helmet, a helmet
marked as complying with this European standard might no
longer satisfy all clauses of this European standard.
This helmet complies with the requirements of the

European standards when the chin strap supplied by the
helmet manufacturer is worn and adjusted in accordance
with these instructions,
1.2

Definitions of alert icons

The following alert icons are used in this document to provide
and highlight areas of the associated text that require a greater
awareness by the user. A definition of the meaning of each
icon is as follows:
WARNING
!
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
!
Indicates a potentially hazardous situation which, if not
avoided, could result in physical injury. It may also be
used to alert against unsafe practices.
NOTICE
i
i
Indicates a potentially hazardous situation which, if
not avoided, could result in damage to the product or
environment.
6
service the product.
2 Description
2.1

Product overview

1
5
4
Dräger
8
11
10
9
6
1 Helmet shell
2 Ventilation system
3 Adaptors
4 Protective goggles (optional)
5 Cord
6 Front comfort piece
7 Rear comfort piece
8 Anti-shock straps
9 Front fasteners
10 Band
11 Suspension mesh
12 Size adjustment system
13 Rear fastener
14 Adjustment band
15 Chin strap
16 Anti-creep system
17 Anti-creep adjuster
18 Rectangular ring
19 Quick-release buckle
20 Anti-stretch strap
21 Neck guard (optional)
2.2

Feature description

The helmet is continuously adjustable for head sizes from 52
to 64 cm. It features a ventilation system that prevents ingress
of sparks, cuttings, or other particles. The ventilation openings
can be sealed completely during an operation.
The helmet can be equipped with goggles. Alternatively, a
mesh visor can be attached to the helmet. Neck guard, lamp
holder, ear protection, and reflective strips are available as
accessory.
2
3
20
16
20
18 17
15
19
21
13
7
12
14
00131261
Dräger HPS 3500