Intenza Water Filter - Philips Saeco XELSIS HD8944 Mode D'emploi

INTENZA WATER FILTER

Remove the water fi lter from its packaging, immerse it vertically (with the opening positioned upwards) in cold water and
gently press its sides to let the air bubbles out.
1
tank and store it in a dry place sheltered
from dust.
4
and re-insert it into the machine.
7
2.4.3. WATER SETTINGS
ESC ACTIVATE FILTER?
OK
NOTE: At the end of the procedure the display automatically returns to the product dispensing page.
If the Intenza water fi lter is not available, insert the small white fi lter previously removed (see point 1) into the tank.
2
Set up the Intenza Aroma System:
5
8
INSERT WATER FILTER
AND REFILL THE WATER T
OK OK
3
reference mark and the groove must
inserted.
6
2.4. WATER SETTINGS
ESC WATER HARDNESS
ENABLE FILTER
ACTIVATE FILTER
OK
9
PLACE A CONTAINER UND
WATER & DISP. SPOU
OK OK
until the cycle is completed and remove
the container.
7
3
OFF