Makita DTP131 Manuel D'instructions page 5

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Switch trigger
6 Lamp
7 LED display
8 Lamp button
9 Reversing switch lever
10 Speed change lever
SPECIFICATIONS
Fastening
Capacities
Impact driver
mode
Hammer drill
mode
Drilling Capacities / Concrete
Drill mode
Capacities
Screwdriver Fastening
mode Capacities
Net weight (with battery cartridge)
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Explanation of general view
11 Mode mark
12 Action mode changing ring
13 Arrow
14 Changed in three steps
15 Hard
16 Medium
17 Soft
18 Control button
19 Battery capacity
20 Bit
Model
Machine screw
Standard bolt
High tensile bolt
–1
No load speed (min )
(Soft / Medium / Hard)
Impacts per minute
(Soft / Medium / Hard)
–1
No load speed (min )
–1
Blows per minute (min
Steel
Drilling Wood
No load speed
(min
Machine screw
Self drilling
screw
No load speed
(min
DTP131
0 – 1,400 / 0 – 2,200 /
0 – 2,800
0 – 1,200 / 0 – 2,400 / 0 – 3,200
0 – 700 / 0 – 2,800
)
0 – 700 / 0 – 2,800
–1
)
3.5 mm – 6 mm / 4 mm – 6 mm
4 mm, 5 mm / 4 mm (Thickness 3.2 mm max.)
0 – 300 / 0 – 1,100 (depends on torque setting)
–1
)
1.5 kg
(with battery BL1415)
1.7 kg
(with battery
BL1430 / BL1440)
D.C. 14.4 V
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
21 Sleeve
22 Bit-piece
23 Groove
24 Hook
25 Screw
26 Standard bolt
27 Fastening torque
28 Fastening time
29 Proper fastening torque
30 High tensile bolt
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 1,300 / 0 – 2,200 /
Low (1) / High (2)
0 – 700 / 0 – 2,700
0 – 8,400 / 0 – 32,400
8 mm
10 mm / 6.5 mm
21 mm / 12 mm
0 – 700 / 0 – 2,700
0 – 600 / 0 – 2,300 (P mode)
(with battery
BL1815 / BL1815N)
(with battery
BL1830 / BL1840)
DTP141
0 – 2,700
1.5 kg
1.8 kg
D.C. 18 V
ENE033-1
5