Recording; Connecting With Other Equipment For Recording; Recording From Analog Audio Equipment With A Line Out Jack - Sony Walkman TCD-D100 Mode D'emploi

( Recording

Connecting with Other Equipment for
Recording
You can connect the tape-corder to other analog audio equipment or audio equipment
with digital output. Refer to page 15 for "Recording".
22 EN
Recording
Recording from analog audio
equipment with a LINE OUT jack
(Analog connection)
TCD-D100
to LINE IN
1
Set the MIC/LINE IN switch to LINE IN.
2
Select the recording mode using the
MANUAL•MIC LIMITER•AUTO (AGC) selector.
MANUAL: adjust recording level manually (see
page 24)
AUTO (AGC):recording level will be adjusted
automatically (see page 16)
3
Select sampling frequency using the SP•LP switch.
SP (48kHz, 44.1kHz): normal recording mode.
LP: long continuous recording mode. Sampling
will be done by 32kHz. (see page 25)
4
Press the r REC and P PAUSE buttons.
5
Press either the ( PLAY or P PAUSE button to
begin recording. Then, begin playback of the
connected source.
Audio connecting cable
RK-G129
(not supplied)
to LINE OUT
Stereo unit
or radio
cassette-
corder, etc.